stainless steel fixed Fastener end plate welding grating saddle
1. Installation clearance of steel grating is 10mm and little
adjustment is allowed. Each side of bearing bar's length in
supporting beam where steel grating loads the two ends of flat
steel is at least 25mm.
2. Installation of steel gratings: Two methods can be used: welding
and using saddle clips. Permanent steel gratings requiring no
dismantling can adopt welding, to be welded onto its supporting
beam; the concrete position is located in the first bearing bar of
each corner for steel grating. Adopting saddle clips will have
advantages of not damaging zinc coat and easy removing. The safest
method is fixing by welding so that steel grating can't fall from
beam due to loosening clips.
3. Application of Saddle Clips: Saddle clip should be installed in
the four corners of steel grating and must be fastened to the
maximum extent to avoid falling off. At least 4 sets of saddle
clips are required for each steel gratings and the quantity of
applying saddle clips will increase as the length of a steel
Type A - composed of a top board with double hook, a holding down
plate with teeth and an M10 (or M8) inner-hexagon-bolt.
Type B - composed of a top board with double hook (where one hook
can draw together two neighboring steel gratings),a holding down
plate with teeth and a M10(or M8) inner-hexagon-bolt.
Type C - composed of a top board with double hook and a M10 (or M8)
hexagon-bolt which can be welded in the supporting structure.
Carbon steel, Stainless steel , and so on .
OEM(Making as the customers' request).
Hot-dipped-galvanized ,electro galvanized or PVC coated ....
intensity, light structure: makes it with high load, and the design
of the clips belongs to
Widely used in the place where use steel grating,such as petroleum
chemical industry, power
plant, water and sewage treatment plants, municipal engineering,
engineering fields of the platform, footpath, zhanqiao pier, ditch
lid, manhole cover,
Naked or packing as the customers' request
|2||Bearing bar pitch||12.5, 15, 20, 23.85, 25, 30, 30.16, 30.3, 34.3, 35, 40, 41, 60mm.
US standard: 1"x3/16", 1 1/4"x3/16", 1 1/2"x3/16", 1"x 1/4", 1
1/4"x 1/4", 1 1/2"x 1/4" etc.|
|3||Cross bar pitch||38,50,76,100,101.6mm|
|5||Surface treatment||Black, hot dipped galvanized, paint|
|6||Thickness||Thickness≥3mm, depth ≥19mm|
|7||Standard||China: YB/T 4001.1-2007|
1. Sample service: Sample service is available for our company.
2. Customized service: We can customize products according to your requirement.
3. After-sales service: Our after-sales service start immediately after signing the
a) No matter FOB or CIF the price item is we would try our best to find a lowest cost for customer's reference.
b) The third party inspection always gets real and true data from us and we will send production photos to customers if
there is no inspection.
c) Do our best to help customer arrange the shipment and customs
d) Installation, maintenance and repair instructions with full information.
e) Accept Changing or Refunding if the products cannot be installed